Air Polishing Unit

Remedies to Indoor Air Quality Problems

 

Remedies to Indoor Air Quality Problems

Living Areas

Paneling, pressed-wood furniture and cabinetry. These products may release formaldehyde gas.
Remedy: Ask about formaldehyde content before buying furniture or cabinets. Some types of pressed-wood products, such as those with phenol resin, emit less formaldehyde. Also, products coated with polyurethane or laminates may reduce formaldehyde emissions. After installation, open windows. Maintain moderate temperature and humidity.

Carpet. Biological pollutants can grow on water-damaged carpet. New carpet can release organic gases.
Remedy: Promptly clean and dry water-damaged carpet, or remove it altogether. If adhesives are needed, ask for low-emitting ones. During installation, open doors and windows, and use window fans or room air conditioners. Vacuum regularly. Consider area rugs instead of wall-to-wall carpet. Rugs are easier to remove and clean, and the floor underneath also can be cleaned.

Floor tiles. Some contain asbestos.
Remedy: Periodically inspect for damage or deterioration. Do not cut, rip, sand or remove any asbestos-containing materials. If you plan to make changes that might disturb the asbestos, or if materials are more than slightly damaged, contact a professional for repair or removal.

Moisture. Moisture encourages biological pollutants, including allergens such as mold, mildew, dust mites and cockroaches.
Remedy: If possible, eliminate moisture sources. Install and use exhaust fans. Use a dehumidifier if necessary. Remove molds and mildew by cleaning with a solution of chlorine bleach (1 cup bleach to 1 gallon water). Maintain good fresh air with natural and mechanical air circulation.

Fireplace. Your fireplace can be a source of carbon monoxide and combustion pollutants.
Remedy: Open the flue when using the fireplace. Have the flue and chimney inspected annually for exhaust backdrafting, flue obstructions or cracks, excess creosote or other damage. Install smoke and carbon monoxide detectors.

Air conditioner. This can be a source of biological allergens.
Remedy: If there is a water tray, empty and clean it often. Follow all service and maintenance procedures, including changing the filter.

Gas or kerosene space heater. These devices can release carbon monoxide and combustion pollutants.
Remedy: Never use unvented kerosene or gas space heaters. In the room where the heater is located, provide fresh air by opening a door to the rest of the house, turning on an exhaust fan and slightly opening a window.

Tobacco smoke. Smoke contains harmful combustion and particulate pollutants, including carbon monoxide and combustion byproducts.
Remedy: Do not smoke in your home or permit others to do so, especially near children. If smoking cannot be avoided indoors, open windows or use exhaust fans, and restrict smoking to one space.

Draperies. New draperies may be treated with a formaldehyde-based finish and emit odors for a short time.
Remedy: Before hanging, air draperies to ventilate odors. After hanging, ventilate the area. Maintain moderate temperature and humidity.

Lead-based paint. Paint manufactured before l978 may contain lead.
Remedy: Leave lead-based paint undisturbed if it is in good condition. Before removing paint, test for lead. Do-it-yourself lead test kits are available from hardware or building supply stores. Do not sand, burn off or remove lead-based paint yourself; hire a person with special training to correct lead-based paint problems.

Animals. Many animals leave allergens, such as dander, hair, feathers or skin, in the air.
Remedy: Keep pets outdoors as often as possible. Clean the entire house regularly. Deep clean areas where pets are permitted. Clean pets regularly.

House dust mites. Biological allergens can trigger asthma.
Remedy: Clean and vacuum regularly. Wash bedding in hot water above 130 degrees F. Use more hard-surface finishes; they are less likely to attract and hold dust mites.

Kitchen

Household cleaners. Unhealthy or irritating vapors may be released from chemicals in products.
Remedy: Select nonaerosol and nontoxic products. Use, apply, store and dispose of them according to manufacturers' directions. If products are concentrated, label the storage container with dilution instructions. Completely use up a product.

Pressed-wood cabinets. These can be a source of formaldehyde vapor.
Remedy: Maintain moderate temperatures (80 degrees maximum) and humidity (about 45 percent). When purchasing new cabinets, select solid wood or metal cabinets or those made with phenol resin; they emit less formaldehyde. Ventilate well after installation.

Unvented gas stove and range. These are a source of carbon monoxide and combustion byproducts.
Remedy: Keep appliance burners clean. Periodically have burners adjusted (blue flame tip, not yellow). Install and use an exhaust fan. Never use a gas range or stove to heat your home.

Bathroom

Personal care products. Organic gases are released from chemicals in some products, such as deodorant and hair sprays, shampoos, toners, nail polish and perfumes.
Remedy: Select odor-free or low odor-producing products. Select nonaerosol varieties. Open a window, or use an exhaust fan. Follow manufacturers' directions when using the product and disposing of containers.

Air freshener. These products can release organic gases.
Remedy: Open a window or use the exhaust fan instead. If you use air fresheners, follow manufacturers' directions. Select natural products.

Bedroom

Humidifier/vaporizer. Cold mist vaporizers can encourage biological allergens, including mold, mildew and cockroaches, that can trigger asthma and encourage viruses and bacteria.
Remedy: Use and clean them according to manufacturers' directions. Refill daily with fresh water.

Moth repellents. These often contain the pesticide paradichlorobenzene.
Remedy: Avoid breathing vapors. Place them in tightly sealed trunks or other containers. Store separately, away from living areas.

Dry-cleaned goods. Chemicals used in the cleaning process release organic gases.
Remedy: Bring odors to the attention of your dry cleaner. Try to air out dry-cleaned goods before bringing them indoors. Seek alternatives to dry cleaning, such as hand washing items.

Utility Room

Unvented clothes dryer. Gas dryers produce carbon monoxide and combustion byproducts and can be a fire hazard. Remedy: Regularly dispose of lint around and under the dryer. Provide air for gas units. Vent the dryer directly to the outside. Clean vent and ductwork regularly.

Gas or oil furnace/boiler and gas water heater. Air quality problems include backdrafting of carbon monoxide and combustion pollutants. Remedy: Have your heating system and water heater, including gas piping and venting, inspected every year.

Asbestos pipe wrap and furnace insulation. These can release asbestos fibers into the air.
Remedy: Periodically look for damage or deterioration. Do not cut, rip, sand or remove any asbestos-containing materials. If you plan to make changes that might disturb the asbestos, or if materials are more than slightly damaged, contact a professional for repair or removal.

Basement

Ground moisture. Moisture encourages biological allergens like mold and mildew.
Remedy: Inspect for condensation on walls, standing water on the floor, or sewage leaks. To keep basement dry, prevent outside water from entering by installing roof gutters and downspouts, not watering close to the foundation, grading soil away from the home, and applying waterproofing sealants to basement interior walls. For standing water, consider installing a sump pump. If sewage is the source, have drains professionally cleaned. If moisture has no obvious source, install an exhaust fan controlled by humidity levels. Remove mold and mildew. Regularly clean and disinfect the basement floor drain.

Radon. This invisible, radioactive gas poses a lung cancer risk.
Remedy: Test your home for radon. Do-it-yourself kits are easy and inexpensive.

Hobby products. Chemicals in products such as solvents, paint, glue and epoxy release organic gases.
Remedy: Follow manufacturers' directions for use, ventilation, application, clean-up, and container storage and disposal. Use outdoors when possible. Indoors, open a window, or use an exhaust fan. Reseal containers well. Clean tools outside or in a well-ventilated area.

Garage

Car and small engine exhaust. These are sources of carbon monoxide and combustion byproducts.
Remedy: Never leave vehicles, lawn mowers, snowmobiles, etc., running in the garage.

Paint, solvent and cleaning supplies. These products may release harmful vapors.
Remedy: Provide ventilation when using them. Follow manufacturers' directions. Buy only as much as you need. If the products contain methylene chloride, such as paint strippers, use them outdoors. Reseal containers well. Keep products in their original, labeled containers. Clean brushes and other materials outside.

Pesticides and fertilizers. Yard and Garden chemicals may be toxic.
Remedy: Use nonchemical methods when possible. Follow manufacturers' directions for mixing, applying, storing and using protective clothing. Mix or dilute them outdoors. Provide ventilation when using them indoors. Store them outside of the home in their original, labeled containers. After using the product, remove your shoes and clean your hands and clothing to avoid bringing the chemicals into your home.

About the Author

Handy Manson is a Licensed Contractor turned 'self professed' internet geek, creating his local internet directory KW Contractor for the Kitchener Waterloo Area. As a fully licesensed contractor, Handy has over 20 years experience in several trades.

Several Hints On Dual Action Buffers

The two most common types of pond aeration systems are diffused aerators and surface aerators. While each and every is highly effective, every single has particular pros and cons that make them the proper option based on your ponds characteristics.

Diffused aeration systems utilize the power of air to de-stratify the water column and infuse oxygen into the pond. Typical set up involves an air compressor that pushes air by means of tubing down to diffuser(s) located plus the bottom of the pond. When the air reaches the diffuser, the diffuser breaks it up into tiny bubbles which are released into the pond. The bubbling action of the air rising to the surface causes the water to de-stratify, meaning the poor, oxygen deprived water at the bottom of the lake is mixed with the oxygen wealthy water above, causing noxious and dangerous gases to be released into the atmosphere. At the surface, where the bubbles break, further oxygen transfer is created adding to the overall oxygen content material of the water.

Diffused aeration is ordinarily utilised in larger/ deeper ponds and lakes of a lot more than 8 ft deep. They also cause extremely little surface agitation for folks who like a smooth look to their pond or lake

Surface aerators, as their name suggests, are situated at the ponds surface. These units utilize a pump mounted beneath a float that pumps water from the pond into the air or appropriate at the surface. Unlike diffused aerators, surface aerators are most effective used in shallow ponds and lakes. Oxygenation using floating aerators occurs when the water that is splashed into the air makes contact with the ponds surface when it comes back down. This interaction permits for the venting of gasses and also the transfer of oxygen, nevertheless since all of the pumping of water and oxygen transfer occurs at the surface, quite small benefit is gained at the lower depths.

Surface aerators may also serve a dual purpose. Aside form the primary function of oxygenating water, surface aerators can add aesthetic appeal as they are out there with distinctive spray patterns. However, if aeration would be to be the main function of the unit, it truly is essential to choose an aerator that creates a fine mist and also a wider display. These sorts of units let for greater venting and oxygen transfer as they generate more turbulence at the pond's surface.

If you may have decided to collect cars or motorcycles for hobby, or you might be in the constructing maintenance business, you may ultimately run in to buffers and polishers. This tool is needed in the event you desire to maintain a paint finish or floor searching its ideal at all times. They also polish the existing finish around the imperfection and blend it in so that is can hardly be seen any longer. You also can use buffering and polishing tools after applying some variety of finish like wax and it is going to make the final surface appear bright and shiny. We desire to take a closer appear at buffers and polishers to support you in realize what they do very best so you'll be able to find the right tool for the job.

I should also suggest that you read more info dealing with Dual Action Buffers and How To Wax Your Car.

Where can I get canned air?

Hi Everyone
Where can I buy canned air? Like in a can.
It has to be safe for me to blow it into my laptop keyboard and into my computer fan. Keyboard is all gooey after I spilt nail polish on it and the computer fan is just..Ugh.
By the way, they are different computers, so don't call me an idiot thinking that a laptop has a tower unit.
Thanks.
Lucy x
P.S: Does anyone have any other ideas how I could cool my computer down and stop it from being dust-clogged?

Canned air for cleaning under the laptop keyboard is a good idea (you can also carefully pry off the keys if you feel brave). For the computer you don't really want to be blowing the dust into it (which you would be if you used canned air from the outside).

Opening the case up and using some good-ol' lung power and a hoover always does the job for me.

Have a general tidy-up of inside your computer; messy cables restrict airflow (which should be front to back - ideally with a fan sucking air in at the front over the hard drives, up over the CPU fan and through an exhaust fan at the back). Just a few cable ties can help things out.

If your CPU is running hot then it would probably be wise to buy a better heatsink/fan unit. You can get good heatsinks which provide much better cooling than the ones which come with the processor.

3M Electric Polisher